Is your dresser drawer sagging or damaged?
No worries! We’ve got easy solutions to help you fix it. With our ten years of experience in furniture restoration, we’ve learned how to overcome common dresser issues.
We’re sharing practical tips and proven methods to revive your dresser and make sure its drawers work perfectly. Let’s get started on making your furniture last for a long time
How to Fix A Dresser Drawer Bottom?
If a drawer bottom of a dresser is used for a long time, then the drawer bottom panel can damage the clothing’s quality. So, fixing a dresser drawer bottom is much necessary. Here is the possible way to fix a damaged dresser drawer bottom.
The best way to fix a dresser drawer bottoms is to reinforce the bottoms and replace the bottom with a new one.
Reinforce The Bottoms
Support for sagging the bottom of a dresser drawer is a possible way to fix a dresser drawer. To give support for a saggy bottom, cut a small block of plywood to ⅜ inch * 2 inches wide and 4 inches high and glue it to the outside of the bottom.
Replace The Bottoms
Dresser drawer bottom replacement is another way to fix a drawer bottom. To replace the bottoms of the drawer, remove the older bottom slides and replace them with thinner plywood so that it can have a heavy load.
Dresser Drawer Bottom Replacement
If the bottom of your dresser drawer is cracked or roughly broken, then the possible solution is to replace the bottom panel with a new one. Let’s discuss the possible process to replace a drawer bottom.
Step 1:
If your drawer has an existing bottom, then remove the bottom first. Also, remove the extra staples and splinters of wood if the drawer has them. Try to leave a groove where the new bottom will fit.
Step 2:
Buy a new bottom panel from any wood hardware store that has thicker than the original. Try to buy ¼’’ plywood or hardboard.
Lay down the new plywood, and the original bottom panel is put into the top. Race it out and cut the plywood to replace it.
Step 3:
To avoid ending up with your clothes or whatever you want to put into this drawer, it is better to smooth the plywood with sandpaper.
Now you are ready to replace the new bottom slide. The new bottom slide should fit into the groove easily.
Step 4:
You can track the board with some 1-inch brad nails during this process. This can give your drawer more support.
How To Fix A Broken Dresser Drawer?
Furniture serves as the most important part of maintaining the inner beauty of the room. But after a long time of use, every piece of furniture can be damaged.
Sometimes this furniture can be broken. So, it is necessary to know how to repair damaged furniture as soon as possible. Let’s have a look at the possible way to fix the broken dresser drawer.
Step-1:
To fix a broken dresser drawer, you must remove the drawer from the dresser. So, removing the drawer is the first step to fixing the dresser drawer.
Step-2:
For a long time, using a dresser can cause the damaged of lower part easily. The most damaged part of a dresser is the bottom slide, so the next step is to fix the bottom part of the dresser drawer.
To fix the bottom part of a dresser drawer, you have to purchase a new hardboard for your bottom slide. Then replace the new hardboard with the older one.
Step-3:
The next step to fix a broken dresser drawer is to fix the back and the side of the drawer. To fix the back and the side, you need a thin wood piece for it.
Measure the dimension of the back and side slide of the old drawer and cut it out.
Then you need to use a nail gun to put them in the drawer. You have a perfect drawer for your use.
How To Fix The Warped Drawer Bottom?
Wrapping the drawer bottom is really frustrating and makes it difficult to keep your clothes organized. The main cause of the wrapped drawer bottom is dampness.
To fix the wrapped drawer bottom, you have to put the drawer bottom in a warm, dry place and wait for it to dry. If the bottom of your drawer is wrapped very badly, then it is better to replace the bottom with new plywood.
People Also Ask
The common materials for drawer bottoms are hardboard or plywood. But it depends on the size of your drawer. If you have a small drawer, then you can use a hardboard. And if you have a large drawer for heavy loads, then you can use plywood.
To fix a sagging dresser drawer, first, you have to check the materials and how roughly damaged the drawer is. If the drawer is cracked, then replace the drawer with a new one. But there is the simplest way to fix a sagging drawer to reinforce the drawer.
To reinforce the drawer of a dresser, you have to replace the bottom with a thicker hardboard or plywood. This is a simple and easy way to reinforce the bottom of a drawer.
Put the bottom back on a drawer; you must remove the bottom. Replace the drawer bottom with plywood or hardboard cut to fit.
Leave a Reply